(Sliding Gate Design)
Mark 4360 Series: self-operated pressure regulators that will handle the majority of your pressure reducing applications on steam, air, gas, liquid, and chemical services. High pressure drop capabilities with low noise. In sizes to 4” (DN100) with threaded or flanged ends.

A differential regulator that maintains a constant differential between the pressure on the discharge side of the regulator and the signal pressure loaded on the diaphragm. In sizes to 2” (DN50).

Used to maintain vacuums at pre-determined settings and regulate vacuums on evaporators, cookers, grinding fixtures, milking machines, altitude chambers and other vacuum systems. Available up to 2” (DN50) size.

For critical applications, these piloted valves provide greater accuracy and lower offset than can be achieved with a self-operated regulator. Sizes to 6” (DN150).

Also available 15 mm – 25 mm S136S
Bronze Body – Water-Oil-Gas Applications
Other
Industrial Globe Style pressure regulators available on request in stainless steel c/steel, d/iron and bronze material.

Self operated valves for general service applications such as maintaining constant pump discharge pressures, bypassing excess pressure around process equipment or maintaining specified pressures within autoclaves and other process machinery. To 4” (DN100) size.

A self contained, internally piloted regulated valve for tight control on critical back pressure applications. In sizes from ½” to 2” (DN15 to DN50).

Featuring an external back pressure pilot, the marl 57 provides accuracy that approaches that of control valves. For economic reasons, you should consider this valve before using other costly, more sophisticated instrumentation. In sizes to 6” (DN150).

Require no external power source or other expensive instrumentation to regulate process temperature. For use on steam, water, air/gas, or chemicals, they are produced in sizes to 2” (DN50) with Cv’s to 70 (Kv to 60.5) and threaded or flanged ends.

A self-operated temperature regulator that features a controlled failure option that allows you to pre-determine the position of the seats in the event of a thermal system failure.

Pilot operated valves that provide wider ranging and greater accuracy can be achieved with a self operated regulator. In sizes through to 6” (DN150). Also available as the Mark 87P, which regulates both temperature and pressure simultaneously.

Features a three-way body for use on diverting service as a bypass or for combining fluids as a mixing value.

Pneumatic control valves with multiple spring actuators for minimized deadband, close control and accurate metering. In sizes through 6” (DN150) with threaded, or flanged (ANSI or DIN) ends.

utilizes a bellows stem seal to control fugitive emissions and reduce the risks associated with toxic, corrosive, explosive, and high temperature fluids.

Pneumatic control valves with a three-way body design for diverting or mixing services.

electric motor control valves that feature heavy-duty industrial motors for proportional, on-off, or 4-20 mA electronic control. Available in sizes to 2” (DN50) with Cv’s to 70 (Kv 60.5).

An electronically actuated control valve that provides precision control and superior accuracy, making it ideal for use as the final control element for distributed process, micro-processor control based systems. In sizes up to 6” (DN150).

2/2 Way Solenoid Valves – Normally Open & Normally Closed
Brass , Plastic , PVC & Stainless Steel body materials avail
Sizes Avail 1/8’’ – 3’’( Depending on material of construction)
Bsp & Flanged connections available depending on model
Voltages 240v/50Hz , 110v/50Hz , 24v/50Hz , 12vDC , 24vDC , 48vDC, 415v/50Hz

2 way normally closed steam solenoid valve.High flow & high temperature piston type with forged brass body & teflon seats. Fitted with a class H high temperature coil rated to 200’c that has 300 mm flying leads & IP50 rating.
Valve is suitable for steam to 180’c @ 10 bar.
Sizes avail
1/8’’ – 2’’ Bsp
1’’ - 2’’ Flanged
Voltages 240v/50Hz , 110v/50Hz , 24v/50Hz , 12vDC , 24vDC , 48vDC, 415v/50Hz

2 way normally open also avail as per B75 Series

2/2 Way Solenoid Valves – Normally Open & Normally Closed
Brass & Stainless Steel Body available
Pressures up to 150 bar depending on Series
Avail in brass , stainless steel , Screwed & flanged
Sizes Avail 3/8’’ – 2’’ Screwed & Flanged

2/2 Way Solenoid Valves – Normally Open & Normally Closed
PVC , PTFE & PLASTIC Body valves available
T95 PTFE Body 1/8’’ – ½’’ , Diaphram Teflon coated viton
Also avail electric/ pneumatic actuated PVC / ABS ball valves

Flameproof & DIP Dust ignition protection housing
All 316 SS to IP 66 / AS2380-1-1989 & AS2380-2-1991
DIP A21T T5 Combustible Dust AS/NZ 61241-1-1999

2/2 way solenoid valvesN/C , Brass body / c/w timer

Wafer & Lugged Types , lever operated and Actuated models available
Materials - Cast Iron , PVC , Carbon & Stainless Steel
Flanged

Pressure gauges are manufactured in many configurations and sizes from 50 mm up to 300 mm dial size in ranges of 2.5 kPa up to 100,000 kPa with brass or stainless steel wetted parts.
Temperature gauges are available in sizes from 25 mm up to 200 mm with ranges of minus 50 deg C to 650 deg C