Passive Fire Protection

Product Group > Passive Fire Protection> FIREfree Ff88 Fire Paint


Firefree Ff88 is a revolutionary water based latex paint. It is non toxic, non hazardous and looks, smells and is applied like a standard house paint.

It can be applied as either a primer or finish coat over existing painted or un painted sufaces with superior adhesion.

It is effective on interior and exterior surfaces. Can be over coated with other quality paintd or goes over exising paints. Life span is well in excess of 10 years with current testing for 20 years.

It has superior bonding, chip and wear resistance attributes.

It will withstand tempertures up to 1094 C for lengths of 1 hour or 2 hours depending upon install thickness.

Performance Data - Australia Standard

TEST STANDARD PRODUCT RATING STRUCTURE
AS1530.4-1997 13mm non rated plasterboard 60/60/60 Walls (Steel or Wooden Stud)
AS1530.4-1997 20mm Pine WeatherBoards 30/30/30 Weatherboards

AS1530.4-1997
Ignitability
Index
(0-10)
1

11mm Plywood Sheet
Spread of Flame
Index
(0-10)
0

1 hour
Heat Evolved
Index
(0-10)
0

Wood in general
SmokeDeveloped
Index
(0-10)
4

AS1530.4-1997 120/120/90 Masonry 2 Hours General Use

Federal Aviation Regulations. Transport Category, Aeroplanes Interior Compartments occupied by Crew or Passengers F.A.R. 25.853 Timber Pallets

 



Top


Product Group > Passive Fire Protection> Firetex


Water based intumescent paint approved to Australian Standards for steel structures for up to 2 hour rating

Standards NZ
Certifire RPL 1 version 1.0
HERA
Ref: MP 9 – fire properties of building materials and element of structure
M70 base coat
Firetex M71 decorative sealer
M71E reinforced alkyd gloss sealer
M90 epoxy intumescent for hydrocarbon fires for Jetfire scenarios

Top


Product Group > Passive Fire Protection> Cafco


Vermiculite/gypsum based coating approve to Australian Standards for steel structures up to 4 hour rating. Can be spray or trowel applied.

AS1530.4 Cafco 300
AS1530.3 Mandolite CP2 for exposed ductwork
Mandolite MII for 4 hour rating hydrocarbon fires

Top


Product Group > Passive Fire Protection> Thermo-Lag 270


Fire barrier system for fire rating electrical cables, approved to F.M. requirements. Applied by spraying or trowel and can easily be patched for cable replacement or repairs

Top


Product Group > Passive Fire Protection> GFS 1000


Vermiculite/gypsum based penetration seal for firerating wall and floor openings for up to 4 hours. Apply water and ready to trowel.

Top


Product Group > Passive Fire Protection> Firefly Plus 60 Cavity Fire Barrier


For roof voids and above suspended ceilings approved to AS1530.4. 10mm thick 1300 x 6000mm size which is flexible and easy and quick to install. Collars and mastic are included for any penetrations.

Top


Product Group > Passive Fire Protection> Tenmat FF109 Downlighter Covers


For fire rated ceilings approved to AS1530.4 1 hour rating. Can be easily installed into existing ceilings from the room.



Top


 

Site Created by e-studio